Table of Contents
Benefits of Using Whirlpool Gold Turbidity Sensor in Your Dishwasher
When it comes to choosing a dishwasher, there are many factors to consider. One important feature that can make a big difference in the performance of your dishwasher is the turbidity sensor. The Whirlpool Gold turbidity sensor is a cutting-edge technology that can greatly improve the efficiency and effectiveness of your dishwasher.
Turbidity Sensors are designed to measure the cloudiness of the water in the dishwasher during the wash cycle. This information is then used to adjust the amount of water and detergent needed to clean the dishes effectively. The Whirlpool Gold turbidity sensor is particularly advanced, as it can detect even the smallest particles in the water, ensuring that your dishes come out sparkling clean every time.
One of the main benefits of using a Whirlpool Gold turbidity sensor in your dishwasher is that it can save you time and money. By accurately measuring the level of dirt and grime in the water, the sensor can adjust the wash cycle accordingly, using only the amount of water and detergent necessary to get the job done. This not only reduces water and energy consumption but also helps to prolong the life of your dishwasher and reduce the need for costly repairs.
| Model | CCT-3300 Series Conductivity Online Controller |
| Constant | 0.01cm-1, 0.1 cm-1, 1.0cm-1, 10.0 cm-1 |
| Conductivity | (0.5~20)mS/cm,(0.5~2,000)uS/cm, (0.5~200)uS/cm, (0.05~18.25)MQ\u00b7cm |
| TDS | (250~10,000)ppm, (0.5~1,000)ppm, (0.25~100)ppm |
| Medium Temp. | (0~50)\u2103 |
| Resolution | Conductivity: 0.01uS/cm, TDS:0.01ppm, Temp.: 0.1\u2103 |
| Accuracy | Conductivity: 1.5%(FS), Resistivity:2.0%(FS), TDS: 1.5%(FS), Temp.: +/-0.5\u2103 |
| Temp. compensation | (0-50)\u00b0C (with 25\u2103 as Standard) |
| Cable length | \u22645m(MAX) |
| mA output | Isolated (4~20)mA, Instrument / Transmitter for selection |
| Control Output | relay contact: ON/OFF, Load capacity: AC 230V/5A(Max) |
| Working Environment | Temp.(0~50)\u2103;Relative Humidity \u226485%RH (none condensation) |
| Storage Environment | Temp.(-20~60)\u2103;Relative Humidity \u226485%RH (none condensation) |
| Power Supply | CCT-3300:DC 24V; CCT-3310: AC 110V; CCT-3320: AC 220V |
| Dimension | 48mmx96mmx80mm(HxWxD) |
| Hole Size | 44mmx92mm(HxW) |
| Installation | Panel mounted, fast installation |
Another advantage of the Whirlpool Gold turbidity sensor is that it can help to prevent spotting and streaking on your dishes. By ensuring that the water is clean and clear throughout the wash cycle, the sensor can help to eliminate residue and Soap scum that can cause unsightly marks on your dishes. This means that you can enjoy spotless dishes every time, without the need for additional rinsing or polishing.
In addition to improving the cleanliness of your dishes, the Whirlpool Gold turbidity sensor can also help to protect the environment. By using only the amount of water and detergent needed to clean the dishes effectively, the sensor helps to reduce waste and conserve resources. This can have a positive impact on the environment, as well as on your utility bills.
Furthermore, the Whirlpool Gold turbidity sensor is easy to use and maintain. Simply load your dishes into the dishwasher, add detergent, and let the sensor do the rest. There is no need to worry about adjusting settings or monitoring the wash cycle \u2013 the sensor will take care of everything for you. Additionally, the sensor is designed to be durable and long-lasting, so you can enjoy its benefits for years to come.
Overall, the Whirlpool Gold turbidity sensor is a valuable addition to any dishwasher. Its advanced technology can help to improve the cleanliness of your dishes, save you time and money, protect the environment, and simplify your dishwashing routine. If you are looking for a way to upgrade your dishwasher and enjoy spotless dishes with minimal effort, consider investing in a dishwasher with a Whirlpool Gold turbidity sensor.