Table of Contents
Understanding the Turbidity Sensor Arduino Datasheet
Understanding the Turbidity Sensor Arduino Datasheet
| Model | CCT-3300 Series Conductivity Online Controller |
| Constant | 0.01cm-1, 0.1 cm-1, 1.0cm-1, 10.0 cm-1 |
| Conductivity | (0.5~20)mS/cm,(0.5~2,000)uS/cm, (0.5~200)uS/cm, (0.05~18.25)MQ\\u00b7cm |
| TDS | (250~10,000)ppm, (0.5~1,000)ppm, (0.25~100)ppm |
| Medium Temp. | (0~50)\\u2103 |
| Resolution | Conductivity: 0.01uS/cm, TDS:0.01ppm, Temp.: 0.1\\u2103 |
| Accuracy | Conductivity: 1.5%(FS), Resistivity:2.0%(FS), TDS: 1.5%(FS), Temp.: +/-0.5\\u2103 |
| Temp. compensation | (0-50)\\u00b0C (with 25\\u2103 as Standard) |
| Cable length | \\u22645m(MAX) |
| mA output | Isolated (4~20)mA, Instrument / Transmitter for selection |
| Control Output | relay contact: ON/OFF, Load capacity: AC 230V/5A(Max) |
| Working Environment | Temp.(0~50)\\u2103;Relative Humidity \\u226485%RH (none condensation) |
| Storage Environment | Temp.(-20~60)\\u2103;Relative Humidity \\u226485%RH (none condensation) |
| Power Supply | CCT-3300:DC 24V; CCT-3310: AC 110V; CCT-3320: AC 220V |
| Dimension | 48mmx96mmx80mm(HxWxD) |
| Hole Size | 44mmx92mm(HxW) |
| Installation | Panel mounted, fast installation |
When working with a turbidity sensor and Arduino, it is essential to have a thorough understanding of the datasheet provided by the manufacturer. The datasheet contains crucial information about the sensor’s specifications, operating conditions, and electrical characteristics. By carefully studying the datasheet, you can ensure that you are using the sensor correctly and getting accurate readings.
One of the first things to look for in the datasheet is the sensor’s operating principle. Turbidity Sensors typically work by measuring the amount of light scattered or absorbed by particles in a liquid. The datasheet should provide details on how the sensor detects turbidity and how it converts this information into a measurable output.
Next, you should pay attention to the sensor’s electrical characteristics. This includes information on the sensor’s power requirements, output voltage Levels, and communication protocols. Understanding these specifications is crucial for interfacing the sensor with an Arduino or any other microcontroller.
The datasheet should also provide details on the sensor’s calibration procedure. Calibrating the sensor ensures that it provides accurate and consistent readings over time. The datasheet should outline the steps required to calibrate the sensor and any calibration standards that need to be followed.
Additionally, the datasheet may include information on the sensor’s physical dimensions, mounting options, and environmental considerations. This information is essential for integrating the sensor into your project and ensuring that it operates correctly in its intended environment.
When working with a turbidity sensor and Arduino, it is crucial to understand the sensor’s datasheet thoroughly. By studying the datasheet, you can ensure that you are using the sensor correctly and getting accurate readings.
