Table of Contents
Importance of Proper Calibration for Dissolved Oxygen Meters
Dissolved oxygen meters are essential tools used in various industries, including environmental monitoring, aquaculture, and wastewater treatment. These meters measure the amount of oxygen dissolved in water, which is crucial for the survival of aquatic organisms and the overall health of aquatic ecosystems. To ensure accurate and reliable measurements, it is important to calibrate dissolved oxygen meters regularly.
Calibration is the process of adjusting the readings of a measuring instrument to match a known standard. In the case of dissolved oxygen meters, calibration involves comparing the readings of the meter to a known concentration of oxygen in a calibration solution. This allows the meter to accurately measure the dissolved oxygen Levels in water samples.
Proper calibration of dissolved oxygen meters is essential for obtaining accurate and reliable measurements. Without calibration, the readings of the meter may be inaccurate, leading to incorrect conclusions about the oxygen levels in the water. This can have serious consequences, especially in industries where precise measurements are crucial for maintaining the health of aquatic organisms or ensuring compliance with environmental regulations.
| Model | POP-8300 Free Chlorine Online Analyzer |
| Measurement range | (0.00-2.00)mg/L(ppm) \\u00a0(0.00-20.00)mg/L(ppm) |
| Accuracy | Indication error 10% |
| Resolution | 0.01mg/L(ppm) |
| Communication interface | RS485 MODBUS RTU communication protocol |
| Analog output | Double channel (4-20)mA output; Isolated, reversible, completely adjustable, instrument/transmitter dual mode; \\u00b10.1mA transmission accuracy |
| Control output | Double\\u00a0channels, Load capacity 50mA(Max),AC/DC 30V |
| Power supply | Connected to electric supply AC80-260V;50/60Hz, compatible with all international market power standards(110V;220V;260V;50/60Hz). |
| Working Environment | Temperature:(5-50)\\u2103;relative humidity:\\u226485% RH(non-condensation) |
| Power Consumption | <20W |
| Storage environment | Temperature:(-20-70)\\u2103;relative humidity:\\u226485%RH(non-condensation) |
| Installation | Wall mounted (with the preset back cover) |
| Cabinet weight | \\u226410kg |
| Cabinet dimension | 570*mm*380mm*130mm(H\\u00d7W\\u00d7D) |
The calibration procedure for dissolved oxygen meters typically involves immersing the sensor in a calibration solution with a known concentration of oxygen. The meter is then adjusted to match the reading of the calibration solution, ensuring that it provides accurate measurements. It is important to follow the manufacturer’s instructions for calibration and to use the correct calibration solutions to ensure the accuracy of the meter.
In addition to regular calibration, it is also important to properly maintain dissolved oxygen meters to ensure their accuracy and reliability. This includes cleaning the sensor regularly to remove any buildup of debris or contaminants that could affect the readings. It is also important to store the meter properly when not in use and to replace any worn or damaged parts as needed.
Overall, proper calibration of dissolved oxygen meters is essential for obtaining accurate and reliable measurements of oxygen levels in water samples. By calibrating the meter regularly and following proper maintenance procedures, users can ensure that their measurements are accurate and reliable. This is crucial for industries where precise measurements are necessary for maintaining the health of aquatic organisms and ensuring compliance with environmental regulations. By investing time and effort into proper calibration, users can have confidence in the accuracy of their dissolved oxygen meters and make informed decisions based on the data collected.
